Menu
While Fiberglass pools require less time to install than their vinyl-lined counterparts, they are just as impressive and functional. These pools come prefabricated from our partnering fiberglass pool manufacturer, Latham. Whatever model you choose, you will have a beautiful, long-lasting pool that will surely be the centerpiece of your backyard.
On average, a fiberglass pool takes between 3 and 4 weeks to build. Below, we have outlined the general construction processes to create this type of pool.
Excavation involves digging a large hole in the ground, smoothing the bottom until it is level, and preparing the hole for the installation of the pool structure.
To create a smooth and level surface, the process of laying a stone bottom involves pouring a concrete footing and spreading a layer of crushed stone that is then compacted.
To install a fiberglass pool, we lift the entire pool structure off of a large, flatbed truck using a crane and set it into the excavated space.
Once the pool is set, we connect its plumbing and lighting systems.
Next, we backfill the pool which involves filling up the outside of the pool walls or hardscape walls with soil or gravel. In the case of a fiberglass pool, we fill it with water as it is being backfilled to prevent the pool shell from lifting out of the ground due to the pressure of the surrounding soil.
Completing a rough grade means that the pool is installed and the surrounding earth is leveled and smoothed. At this point, the ground has not grown grass back yet.
Once the rough grade is completed, we set the equipment pad (i.e., the concrete surface upon which the main pool equipment will reside) and install the essential pool equipment including the pool pump and filter.
Electrical wiring and bonding are necessary to verify that the electrical current is running safely and correctly. This step also confirms that the pool equipment is functioning properly.
We insert stone into the foundational space where the patio and pool deck will sit.
In order to prepare and reinforce the concrete base for the pool deck and patio, we first form, rebar, and/or bond the concrete before pouring and smoothing it out.
According to Pennsylvania Zoning guidelines for inground pools, we build a fence measuring at least 48 inches high where necessary.
The look of the pool environment is complete with the addition of elements that enhance the surrounding landscape.
Goodall staff teaches you to operate and maintain your fiberglass pool properly once the structural elements are in place.
We can apply a Sundek overlay, adding colors and textures to the concrete surfaces, approximately 30 days after the concrete is poured.
The site tube is an 8-inch piece of PVC pipe sitting below the base of a fiberglass pool. This allows you to see if there is any water collecting underneath the pool shell. If so, you can drop a sump pump into the piping to remove any water underneath the pool. This is most commonly the case when there is any major work being done to the pool.
We are proud of the work we have done throughout our community in Central Pennsylvania for several decades. The words and experiences of our customers are what we are most proud of. See what our customers are saying about how Goodall Pools & Spas has helped them enjoy sparkling water and lifelong memories.
Ready to get started on creating a backyard that caters to you? The Goodall Pools & Spas team is here to help!
Fill out the form and we'll contact you ASAP.
Let one of our professional team members help you achieve your dreams and answer any questions you might have.
